Steel / Metals

Annular Cutters 55mm long Annular Cutter: Ø 50 mm One way to avoid dimpling and deburring while making holes in tube and pipe is to use annular cutters. Because annular cutters are hollow on the inside, there is no dead-zone resistance to overcome. Using a twist drill to make holes in pipe or tubing can prompt concerns about the hole roundness, location accuracy, hole finish, chip extraction, burrs, and drilling duration. The focal point of these concerns is the twist..

Tork Craft Annular Hole Cutter — HSS 55 × 30 mm, 19.05 mm (3/4') Weldon Size: 55 mm x 30 mm [3/4' Weldon Shank] This 55 mm diameter HSS annular cutter from Tork Craft is engineered for large-hole broaching in steel and cast-iron where depth is limited. With a 30 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it delivers clean, burr-reduced holes with minimal feed force — ideal for flange, pipe, or structural plate applications where larger clearances are required.....

Tork Craft Annular Hole Cutter — HSS 55 × 55 mm, 19.05 mm (3/4') Weldon Size: 55 mm x 55 mm [3/4' Weldon Shank] This 55 mm diameter HSS annular cutter from Tork Craft is engineered for large-hole broaching in steel and cast-iron where depth is limited. With a 55 mm cutting depth and robust 19.05 mm (3/4″) Weldon shank, it delivers clean, burr-reduced holes with minimal feed force — ideal for flange, pipe, or structural plate applications where larger clearances are required.....

Tork Craft Annular Hole Cutter — HSS 58 × 30 mm, 19.05 mm (3/4') Weldon Shank Size: 58 mm x 30 mm [3/4' Weldon Shank] This 58 mm diameter HSS annular cutter from Tork Craft is built for making large-clearance holes where depth is limited. With a 30 mm cutting depth and robust 19.05 mm (3/4') Weldon shank, it delivers fast, clean broaches with minimal burrs, reduced feed force and consistent performance in steel or cast-iron plate.....

Tork Craft Annular Hole Cutter — HSS 58 × 55 mm, 19.05 mm (3/4') Weldon Shank Size: 58 mm x 55 mm [3/4' Weldon Shank] This 58 mm diameter HSS annular cutter from Tork Craft is built for making large-clearance holes where depth is limited. With a 55 mm cutting depth and robust 19.05 mm (3/4') Weldon shank, it delivers fast, clean broaches with minimal burrs, reduced feed force and consistent performance in steel or cast-iron plate.....

ALPEN SC CENTREDRILL 2.6X6.3....

ALPEN SC CENTREDRILL 3.15X8.00....

ALPEN SC CENTREDRILL 4.0X10.00....

ALPEN STEP DRILL HSS Co5 TIN 6-37MM....

Tork Craft - Double end stubby HSS Drill diameter: Ø3.0mm Packaging: Bulk - 1 Piece Point: 135° split point Drill bit: HSS (High-speed steel) Application: The double end stubby drill bit is made from HSS (hi-speed steel) and is precision fully ground at 135° with a split point. The split point adds 2 extra cutting edges with the adantage of reducing the amount of pressure required to perform the cut. The sturdy double end allows for twice the usage making the drill bit m..

Tork Craft - Double end stubby HSS Drill diameter: Ø3.2mm Packaging: Bulk - 1 Piece Point: 135° split point Drill bit: HSS (High-speed steel) Application: The double end stubby drill bit is made from HSS (hi-speed steel) and is precision fully ground at 135° with a split point. The split point adds 2 extra cutting edges with the adantage of reducing the amount of pressure required to perform the cut. The sturdy double end allows for twice the usage making the drill bit m..

Tork Craft - Double end stubby HSS Drill diameter: Ø3.3mm Packaging: Bulk - 1 Piece Point: 135° split point Drill bit: HSS (High-speed steel) Application: The double end stubby drill bit is made from HSS (hi-speed steel) and is precision fully ground at 135° with a split point. The split point adds 2 extra cutting edges with the adantage of reducing the amount of pressure required to perform the cut. The sturdy double end allows for twice the usage making the drill bit m..